WASPE 3-in-1 60K Puffs

One case I had to stop swapping devices for

I keep three flavours going at once and I have done it the expensive way for years: three separate bars in a jacket pocket, and a running argument with myself about which one to take out. I ran the WASPE 3-in-1 60K that way for eleven days instead, and the honest result is that the case is heavier than I would like (this shop lists 47 x 47 x 116mm and roughly 130g per piece) while the routine is genuinely simpler. What follows is what the device is, how far the puff rating stretches in real use, how the twelve triple sets differ, and where this page has to say that a figure is not ours to confirm.

Three sealed chambers instead of three units

The 3-in-1 is one body with three separate e-liquid chambers, each holding 18ml, for 54ml in total. Each chamber has its own 0.9ohm mesh coil, so nothing is shared between them except the mouthpiece and the shell. You store one device instead of three and you lose the pocket clutter; in exchange you carry something closer in size to a small hip flask than to a bar-style disposable.

WASPE rates it at up to 60,000 puffs

That is the manufacturer’s figure for the whole device, which works out at 20,000 puffs per chamber if you spread it evenly across the three. Treat it as the maker’s rating rather than a measured result: WASPE publishes it, we repeat it, and no independent test of this exact 54ml device is available to us. The section on what the number really buys you takes that apart properly.

Working the switch, the screen and a normal day

This is the part the listings leave out, and it is the part that decides whether the device feels clever or annoying in week one.

Turn the selector, do not push it

Our own listing describes a mechanical switch that rotates to open the path to one chamber and its coil. Rotate it in one direction only, click to click, until it settles in a position you can feel rather than guess. Do not force it past its stop and do not work it back and forth while you are drawing on the device. Owners who had to search online for how the change-over works are the reason this paragraph sits ahead of the specification table.

What the display reports back

The screen carries a battery readout and a liquid meter. Use both as early warnings rather than stopwatches: the battery figure tells you a top-up is coming, and the liquid meter tells you which of the three chambers is closest to empty so you can rotate away from it before the coil runs dry. This shop’s listing does not say precisely how the liquid meter separates one chamber from another, so we are not going to claim that it does.

What a normal day looks like

Rotate to the profile you want, draw, put it down. If you take long draws on a cold morning, expect the flavour to sit flatter for the first few puffs than it does an hour later. There is no airflow dial and no boost setting on this model, which is the one design decision buyers most often wish were different.

Reading the specification as a buyer, not a supplier

Everything below is what this shop’s own listing states for this device. If a number is missing from this table, our sheet does not carry it and we are not going to borrow it from somebody else’s page.

What our listing states, and what each figure changes for you

Where another page states a different number

One spec is worth flagging before you order, not because either sheet is dishonest but because they were plainly filled in at different times.

What 60,000 puffs really buys you

This is the number every listing leads with and none of them explains, so here is the arithmetic and then the caveat.

The same claim read per chamber

The four things that move you inside the band

Draw length is the biggest one: a three-second draw consumes noticeably more liquid than a one-second draw, and the rating is built on short draws. How often you use it matters almost as much, because a device left in a warm bag between sessions loses a little liquid to condensation. How early you rotate away from a chamber decides whether you finish it cleanly or abandon the last of it. And how hard you pull on a chamber the meter already calls empty is the one variable that can end a coil before its liquid does. What we cannot hand you is a verified real-world total: the reviewers who discuss this device contradict each other, so an honest page says the number is the maker’s and the outcome is yours.

The twelve triple sets, and who each one suits

A set is not a single flavour. Each of the twelve is a fixed trio, and the trio is what you choose at checkout rather than the three tastes one by one. Below, every set is listed in the order this shop’s listing gives it, with the profile family and the reader it tends to suit, so you can decide from the page instead of from a photograph.

All twelve sets, as the listing numbers them

Ice-led sets, and the two with no ice at all

Sets 3, 5 and 9 carry a cold finish, and set 3 carries three of them. If that chill is not for you, sets 7 and 10 are the two in the range with no ice profile in any of their three chambers. Buyers in review tabs occasionally find the range as a whole leans minty, so if you want none of it, start at set 7.

Candy, soda and orchard sets

Sets 2, 4, 6, 8 and 12 are the sweet end of the list, and set 11 is the only soda set. Sets 5 and 10 sit between the two camps. Because each set is fixed, the practical advice is to order one sweet set and one fruit set rather than two from the same family, since the switching only pays for itself when the three chambers genuinely differ from each other.

Charging it, storing it and keeping the coils alive

A rechargeable disposable is only convenient when the charging and the handling are boring. These are the habits that keep this one boring.

Type-C charging on a 650mAh cell

The cell is listed at 650mAh and charges over Type-C. Our sheet does not state a charge time, so we are not going to invent one. What we can say is that a 650mAh cell is a top-up-sized battery rather than a whole-evening one, so expect to charge during the day if you draw heavily. Use the cable and adapter you already use for a phone, and let the readout tell you when to unplug it.

What to avoid, and what it costs you

Does this device suit you?

Two columns, no hedging. If you land on the right-hand side, the WASPE Bar 60K and the WASBAR 60K are the other two in this shop’s WASPE 60K range and both are worth a look before you commit.

The honest verdict, in two columns

Questions we get before an order

Does a triple set cost more than a single-flavour device?

Pricing sits with the listing and the cart rather than in this text, so compare the two products side by side on the shop. What we can say is that you are buying one body with 54ml inside it, not three bodies.

Can I buy one device, or is it boxes only?

This is a retail listing for a single device. The box and carton figures at the end of the page apply to trade orders; if you want a case rather than a unit, say so when you order so it is picked correctly.

Which set should I pick if I have never used a triple-chamber device?

Set 1, because its three chambers are the furthest apart in character: one cold, one soft fruit and one sharp citrus. If you find the citrus too much, set 7 carries no ice at all and is the gentlest start in the range.

Will the second flavour taste of the first one?

Each chamber has its own 0.9ohm mesh coil, so the intended experience is that the previous profile does not follow you across. We will not claim it is impossible: vapour can linger in a shared mouthpiece and an unsettled chamber can carry a trace. Rotating cleanly and taking a couple of draws to settle gives the best result.

How many puffs will one charge be good for?

We do not publish a figure for this device, because we have not measured one and the sources that quote a number are describing a different WASPE model with the same 650mAh cell. If it matters to your routine, assume you will charge more than once across the life of the 54ml rather than once.

Does the display report the chamber I am on, or all three?

Our listing states that the LED shows battery level and liquid level, and it does not specify how the liquid reading is split between the three chambers. Treat the reading as a general warning that liquid is running down somewhere, and check the chamber you are drawing on rather than trusting a per-chamber figure we cannot evidence.

What happens if one chamber is faulty when it arrives?

Say so as soon as you notice, before the device has been used across all three positions, and describe which position failed. A chamber that will not draw is a defect rather than a handling problem, and it is best reported while the unit still shows the fault clearly.

Trade and reseller orders

One block, at the end, for shops and resellers. Everything above is the retail view; below is what you need in order to move a case.

How it ships in quantity

What the box does not tell your staff

Your counter staff will get the same question this page opened with: how do you change the flavour. Show them the selector and the rotation before the first sale, because a customer who cannot find the control brings the device back. The other thing to brief them on is the fixed draw. This model has no boost and no airflow dial, so a customer who wants a stronger hit should be pointed at a different device rather than sold this one twice.

Checking a case before you commit

Open one box and rotate through all three positions on a sample unit. Confirm that the reading changes, that the selector stops cleanly at each position, and that the strength matches the variant you are actually ordering, since our sheet lists three strengths and does not state which one is shown. If you are matching this device against the rest of the range, the WASPE brand page lists what else is in stock, and the 60k puffs range is where the direct alternatives sit. Specification figures on this page are the manufacturer’s and this shop’s own listed values; they are not a performance guarantee, and the puff rating is the maker’s. Orders ship without a returns arrangement, so confirm quantities and variants before the order is placed.